What does error code B0060 mean?
The B0060 fault code, applicable to all car manufacturers, means “Driver Seatbelt Tension Sensor (Subfault)“.
Background Information: The seatbelt tension sensor electronically transmits the seatbelt tension at the time of a collision to the airbag control module, serving as a crucial parameter for determining whether the airbag deploys. This sensor effectively prevents the passenger airbag from deploying when there are no passengers or when the passenger’s weight is below a certain range.
Symptoms of B0060 Error Code
Indications of B0060 error code may include:
- Airbag light illuminated on the dashboard
- Safety warning light
- Inactive seatbelt pretensioner system
- Error encountered while attempting to diagnose the SRS system
Main Causes of B0060 Error Code
- Driver seatbelt tension sensor malfunction
- Open or short circuit in the sensor circuit
- Damaged connector or corroded contacts
- Safety control module malfunction
B0060 Error Codes in Different Car Models
Ford’s B0060: In Ford vehicles, error B0060 is typically related to a malfunction of the driver seatbelt tension sensor. It is recommended to check the wiring and connectors for damage.
B0060 in Chevrolet: In Chevrolet models, this error may occur due to corrosion of the sensor connector contacts. Cleaning the contacts and inspecting the wiring will help resolve the issue.
B0060 in Toyota: In Toyota models, error B0060 may be caused by a faulty safety control module. It is necessary to diagnose the module and replace it if necessary.
B0060 in Honda: For Honda vehicles, error B0060 typically indicates a broken belt tension sensor circuit. Checking the wiring integrity and replacing damaged areas will help resolve the issue.
B0060 in Hyundai: In Hyundai vehicles, this error may be caused by a faulty seatbelt pretensioner. It is recommended to check its performance and replace it if necessary.
How to diagnose the B0060 error code?
- Connect an OBD2 scanner to the vehicle’s diagnostic connector and read the error code.
- Check the B0060 code and other related errors.
- Visually inspect the wiring and connectors of the driver’s seatbelt tension sensor for damage or corrosion.
- Use a multimeter to test the sensor resistance and compare the value with the manufacturer’s specifications.
- Diagnose the safety management module to identify possible faults.
Possible Causes and Diagnostic Methods
| Possible Causes | How to Check？ |
|---|---|
| Seatbelt tension sensor malfunction | Measure the sensor’s resistance with a multimeter |
| Open circuit or short circuit in the sensor circuit | Visually inspect the wiring for damage |
| Console damage or contact corrosion | Check the connector condition and clean the contacts |
| Safety control module malfunction | Diagnose the module with an OBD2 scanner |
Required tools: OBD2 scanner, multimeter, trim removal tool kit, contact cleaner
How do I resolve error code B0060?
Simple Repair Methods
- Clean the contacts of the seatbelt tension sensor connector.
- Replace the damaged wiring or connector.
- Reset the error code with an OBD2 scanner after fixing the problem.
In-depth Diagnostic and Repair Solutions
- Replace the faulty seatbelt tension sensor.
- Repair or replace the safety control module.
- Inspect the seatbelt pretensioner and replace it if necessary.
Troubleshooting Through Symptoms
| Symptoms | Possible Solutions |
|---|---|
| Airbag light illuminates on dashboard | Check and replace seatbelt tension sensor |
| Safety alarm | Diagnosis and repair of safety control module |
| Inactive seatbelt pretensioner | Check and replace seatbelt pretensioner |
Frequently Asked Questions about B0060
Can you drive with error code B0060?
It is not recommended, as the safety system may fail in an accident, increasing the risk of injury.
Can I reset error code B0060 without fixing it?
It can be reset using an OBD2 scanner or by disconnecting the battery, but if the fault persists, the error will reappear.
What happens if you don’t fix error B0060?
Airbags and seatbelt pretensioners may fail to deploy in an accident, severely reducing the driver’s level of protection.
B0060 Related OBD2 Errors
B0050 – Driver Seatbelt Sensor (Subfault)
B0051 – First Row Center Seatbelt Sensor (Subfault)
B0070 – Driver Seatbelt Pretensioner A Deployment Control (Subfault)
Important! Ignoring this error may lead to safety system failure in an accident, increasing the risk of injury. If error B0060 is detected, it is recommended to immediately diagnose the safety system, check the wiring and connectors, and replace any defective parts. This will ensure the reliable operation of the safety system and protect the safety of the driver and passengers.