Pressure Washer Parts and Accessories
- High-quality metal-coated washer gun (Aluminum alloy is best, followed by zinc alloy, and then copper).
- High-grade hose (A good hose is odorless, frost-resistant, sun-resistant, and high-pressure resistant).
- Quick-connect plastic (or all-copper) water flow connector/shut-off connector.
- 1/2″ or 3/4″ plastic (or all-copper) standard adapter.
- 12-24mm universal faucet adapter.
Installation Method for Car Pressure Washer
1. Connecting the Hose End to the Faucet
① First, note that two types of adapters are typically included: a standard adapter and a universal adapter.
② Standard Adapter: Primarily used to connect to faucets with threads. First, unscrew the filter screen at the front of the faucet; then simply screw the standard adapter on in its place.
③ Universal Adapter: Used to connect to faucets with an outer diameter of 14-21mm. First, secure the universal adapter to the faucet; then connect the standard adapter to it; subsequently, connect this to the end of the hose.
2. Connecting the Front End of the Hose to the Washer Gun
① First, pull the quick-connect sleeve all the way down.
② Then, insert the nipple of the connector (or the gun nozzle) into the quick-connect until it bottoms out.
③ Finally, release the quick-connect sleeve to let it snap back into place. The connection is now complete.
④ Note: The connection method may vary for different brands of pressure washers. It’s best to consult the washer’s user manual for specific instructions.
Pressure Washer Installation Sequence
- Standard Adapter Installation Sequence:Faucet → Standard Adapter → Water Flow Connector → Hose → Shut-off Connector → Washer Gun.
- Universal Adapter Installation Sequence:Faucet → Universal Adapter → Water Flow Connector → Hose → Shut-off Connector → Washer Gun.