How to Use a Fully Automatic Car Wash Machine
- Guide the vehicle into the automatic car wash bay, close all doors and windows, and fold in the rearview mirrors;
Before the vehicle enters the track, check if the wipers, antenna, and rearview mirrors are functioning properly;
Check the vehicle body for any obvious scratches, loose or detached parts, etc.;
Turn on the main power switch and check the indicator lights to confirm that the power supply is normal;
Then turn on the control panel power button; all items should display normally;
Finally, after confirming that the water, electricity, and air are all normal, you can begin the washing process.
Note: Different types of fully automatic car wash machines may have different operating procedures. Please refer to the user manual for specific instructions.
Precautions for Using a Fully Automatic Car Wash Machine
Do not mix foam wax with other strong alkaline cleaning agents during washing to avoid poor results;
The ratio of foam wax should not be too high, otherwise, the excessive foam will make cleaning difficult;
Before operating the automatic car wash machine, ensure that there are no obstacles around it and that there are no people within the washing area. Pay particular attention to checking the conveyor belt for any objects;
During the automatic car wash process, operators are strictly prohibited from leaving their operating post and should be prepared to respond to any emergencies and take appropriate action.